Lアングルの鉄脚・天板落とし込みタイプ/DIY用アイアン脚パーツ4本セット/"NAGATA LEGS". A set of 4 table legs for DIY tables. Handmade
0
This product is a set of 4 DIY table legs for making your own table. I, a welder, will make each one carefully. The brand name is "NAGATA LEGS". It will take some time to deliver from Tokyo, Japan to your country, so please understand. The legs of the table are made of L-shaped iron, which is made by pouring molten iron into a mold and compressing it. The material size is 3 mm x 30 x thickness 30 (mm). There is a crack pattern with an antique texture, and the color of the material is black, blue, and gray. We call it "KUROKAWA" color. Finished with a matte clear spray paint. You can also repaint it to your favorite color.This product is a table leg that attaches to the corner of a wooden table top. The recommended size of the tabletop to be prepared is within t=30×1200×600 (mm). If the top plate size is larger than this, the table may shake. Four φ5 (mm) holes for fixing the top plate are machined on the table leg. Please prepare the wood screws by yourself. Also, you should use an electric screwdriver. The material size of the L-shaped angle steel is 3 mm x 30 x thickness 30 (mm), so the thickness of the wooden top board must be 27 mm or more. The height of the table legs is 707mm. Therefore, if a top plate with a thickness of 27 mm is attached to the table legs, the total height of the table will be 710 mm. In addition, when a top plate with a thickness of 30 mm is attached, the total height of the table is 713 (mm). The table legs have small adjusters. The height of the table legs can be adjusted about +6 to 7 (mm).As an aside, since the L-angle steel material has a slight radius on the inside, if it is fixed to the table legs without chamfering the back of the table top, there will be a gap of about 2 mm between the table legs. . If you're concerned about this issue, sanding the bottom corners of the tabletop a bit will give a perfect fit and look.It is recommended to prepare a top plate of your favorite wood and make a stylish table.
This product is a set of 4 DIY table legs for making your own table. I, a welder, will make each one carefully. The brand name is "NAGATA LEGS". It will take some time to deliver from Tokyo, Japan to your country, so please understand. The legs of the table are made of L-shaped iron, which is made by pouring molten iron into a mold and compressing it. The material size is 3 mm x 30 x thickness 30 (mm). There is a crack pattern with an antique texture, and the color of the material is black, blue, and gray. We call it "KUROKAWA" color. Finished with a matte clear spray paint. You can also repaint it to your favorite color.This product is a table leg that attaches to the corner of a wooden table top. The recommended size of the tabletop to be prepared is within t=30×1200×600 (mm). If the top plate size is larger than this, the table may shake. Four φ5 (mm) holes for fixing the top plate are machined on the table leg. Please prepare the wood screws by yourself. Also, you should use an electric screwdriver. The material size of the L-shaped angle steel is 3 mm x 30 x thickness 30 (mm), so the thickness of the wooden top board must be 27 mm or more. The height of the table legs is 707mm. Therefore, if a top plate with a thickness of 27 mm is attached to the table legs, the total height of the table will be 710 mm. In addition, when a top plate with a thickness of 30 mm is attached, the total height of the table is 713 (mm). The table legs have small adjusters. The height of the table legs can be adjusted about +6 to 7 (mm).As an aside, since the L-angle steel material has a slight radius on the inside, if it is fixed to the table legs without chamfering the back of the table top, there will be a gap of about 2 mm between the table legs. . If you're concerned about this issue, sanding the bottom corners of the tabletop a bit will give a perfect fit and look.It is recommended to prepare a top plate of your favorite wood and make a stylish table.
