Embroidery Round Frame Stand C (pine) [Export] EDDY WOODWORKS JAPAN / Embroidery hoop not included

[Product Name] Embroidery Round Frame Stand (made from pine-wood）（EXPORT) 　【Round handle attached & 3 types of grip included】 / Export specification [Accessories] Standard grip, thick frame grip, extra thick grip, 1 thread winder 　/Equipped with wooden round handle　《Embroidery frame not included》 [Product Features] ◇A tabletop embroidery stand that can be used to set the round frame you normally use. ◇No need to hold the round frame, you can embroider easily with both hands. ◇The angle can be freely adjusted and it can be tilted to the back side, making it easy 　　to process the back side. ◇This model is equipped with a wooden handle on the screw handle, and is also easy to use. [Product specifications] ◇Height to embroidery surface: Approximately 18cm ◇Base size: Length 16cm x Width 20cm x Height 18cm ◇Weight: Approximately 530g ◇Material: Pine wood (Handle: White ash wood, Round bar: Beech wood) ◇The stand head can be removed for compact storage. ◇There is a hole in the stand base for thread winding. [About the embroidery frame set] ◇This stand can be used to set round frames from about 8cm to about 20cm. ◇Please use the three types of grips included depending on the thickness of the round frame. 　　①Standard grip ⇒Compatible with frames with a thickness of 7 to 12mm 　　②Thick frame grip ⇒Compatible with frames with a thickness of about 12 to 16mm 　　③Extra thick grip ⇒Compatible with frames with a thickness of about 16 to 20mm 　　　　Note: The frame thickness indicated is an approximate size. 　　　　Note: The thickness will increase when the fabric is stretched over the round frame. 　　　　Note: The thickness will also increase when using bias tape. ◇The grip is not fixed due to the structure. Please be careful not to lose it. ◇When using large round frames over 20 cm or thick fabrics, the grip may be overloaded and damaged. ※The round frame, spool, and scissors in the image are for display purposes only.